Eaw MQ1366e Bedienungsanleitung PDF herunterladen

Frequency Response (1 W @ 1m)

±3 dB 250 Hz to 12 kHz

-10 dB 200 Hz

Axial Sensitivity (dB SPL, 1 Watt @ 1m)

Passive 107

MF 109

HF 107

Impedance (Ohms)

Passive 8

MF 8

HF 8

Power Handling, AES Standard (Watts)

Passive 325

MF 400

HF 150

Calculated Maximum Output (dB SPL)

Passive Peak 138

MF Peak 141

HF Peak 135

Passive Long Term 132

MF Long Term 135

HF Long Term 129

Nominal Coverage Angle/-6 dB points (degrees)

Horizontal 60

Vertical 60

Recommended High-Pass Frequency

24 dB/Octave 200 Hz

SPECIFICATIONS MQ1366e

FEATURES

DESCRIPTION

PERFORMANCE

One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice. MQ1366e/0002679/2 pp April 2002 Printed in USA

APPLICATION

PHYSICAL

Configuration Mid/High

Powering Passive or Bi-amplified

MF Subsystem 1x 10-in horn-loaded cone,

Radial Phase Plug™

HF Subsystem 1x 2-in exit/3-in voice voil com-

pression driver on constant

directivity horn

Enclosure Materials

Exterior grade Baltic birch plywood

Finish

Wear resistant textured black paint

Connectors Terminal barrier strip

Suspension Hardware 16x 3/8"-16 threaded mounting

suspension points (4 each top,

bottom and sides)

Grille Powder coated perforated steel

Dimensions inches millimeters

Height 40.00 1016

Width (front) 32.00 813

Width (rear) 8.12 206

Depth 25.61 650

Trapezoid Angle 25° per side

Weights pounds kilograms

Net Weight 148 67.3

Shipping Weight 156 71.0

• Dedicated horn loaded MF/HF array module

• 10-in MF w/ Radial Phase Plug™; 2-in exit

Neodymium HF

• 60° x 60° beamwidth

• Vertically configured to create horizontal arrays

A dedicated mid/high system in a vented trapezoidal enclo-

sure. Includes a horn-loaded 10-in MF cone with Radial Phase

Plug™ and a 2-in exit/3-in diaphragm Neodymium compres-

sion driver. The MF and HF horns provide a nominal 60° x 60°

beamwidth. An internal passive crossover with jumpers on the

input panel allows user selection of either bi-amplified or

passive operation. In either case digital signal processing is

required to achieve specified performance. The enclosure

features a comprehensive system of 3/8”-16 threaded sus-

pension points.

The MQ1366e employs a no-compromise design where the mid

and high frequency horns are truly large enough to provide

optimal pattern control throughout each passband. The horns

feature a rigid but well-damped construction using wood

veneer backed by structural foam. The MQ1366e has been

designed to work with a complementary MQ1300 Series LF

loudspeaker to create a full-range audio system, but may also

be used without a LF complement for voice-only applications.

The enclosure is vertically configured for arraying in horizon-

tal rows. Horizontal arrays are typically used in venues, such

as houses of worship, where the array must address wide, fan-

shaped audiences.

Application Usage: Install

Houses of Worship Auditoriums

Theatres Arenas

Performing Arts Centers Stadiums

1 2

SPECIFICATIONS MQ1366e 1

Inhaltsverzeichnis

Seite 1 - SPECIFICATIONS MQ1366e

Frequency Response (1 W @ 1m)±3 dB 250 Hz to 12 kHz-10 dB 200 HzAxial Sensitivity (dB SPL, 1 Watt @ 1m)Passive 107MF 109HF 107Impedance (Ohms)Passive

Seite 2

SPECIFICATIONS MQ1366eDIMENSIONAL DRAWINGA & E SPECIFICATIONSOne Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Eaw MQ1366e Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Akustik Eaw MQ1366e herunter. EAW MQ1366e User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Akustik Eaw MQ1366e